TU2.3

The designers of Elena Marchetti™ have created taping units which can be used with every type of adhesive tape. Perfect for distributing tape, the units are reliable, strong and easy to use.

TECHNICAL DESCRIPTION
Elena Marchetti™ taping heads are made of steel and anodized aluminium or 100% stainless steel for use in especially aggressive environments. The roll holder system and the components of the internal kinematic mechanism, including the blades, are protected by special panels for maximum safety. The frontal lap is applied to the leading side of the box: the tape is then distributed along the full length of the box as it moves, it is cut by the safety serrated blade and finally it is folded over on the rear side. Various models of the Elena Marchetti™ taping heads are available depending on the tape width and the overlap applied to the front/rear of the box. The Elena Marchetti™ Goldtape sealing machines generally use two taping heads, one lower and one upper, differing only in the setting of the loading spring. They can be easily distinguished by the adhesive applied to the side of the head.

PLUS
❶ The units are equipped with a retractable safety device for the first cut of the tape without using the main blade.
❷ The cutting strength of the main blade is adjustable.
❸ Fully interchangeable: the taping heads are designed to work as top and bottom sealers, by simply changing the setting of the loading spring and they are suitable for all Elena Marchetti™ Goldtape sealing machines.
❹ The special design ensures the pressure is consistent, even when the box does not have an even surface.
❺ To change the setting, use the pre-positioned pins: it can be done easily and quickly.
❻ Tape roll diameter up to 360mm.
❼ The braking pressure is consistent when using the tape, ensuring it unrolls evenly.

Description

DIMENSIONS OF THE BOXES TO SEAL
Width: minimum 100 mm
Height: minimum 115 mm
(with two taping heads)

Questions?
close slider

Got Questions? We are here for you!