The control panel is equipped with:
1 emergency mushroom pushbutton
1 pushbutton disables brake of the ring
to disable the rotating ring motor brake
1 pushbutton film hooking
Pushing it the piston of the film hooking comes forth and releasing it goes back in the original position
1 pushbutton and pedal start- stop work cycle
Pushing it the conveyors start to move, if the button is pushed a second time before the product is intercept by the photocell in the input, the conveyors stop again
1 reset pushbutton
1 switch reverse gear conveyors
1 potentiometer to regulate the speed of the ring
1 potentiometer to regulate the speed of the conveyors
1 programmable terminal for the setting of the various parameters and to select one of the 8 the different banding types
Hooking, cutting and holding stretch film
Automatic hooking, cutting and holding of the stretch film at the end of each wrapping cycle. It is a hot cutting through the facility of a heater Teflon coated. This clever precaution prevents that in the course of time residues of the stretch film remain on the heater jeopardising the proper functioning.
Motor rotation unit
The motor of the rotation unit is a brake motor- asynchronous and three-phase. This allows to maintain always the same hold point of the film spool at the end of each wrapping cycle, no matter if the spool has more or less weight.
Regulation of the stretch film tension
The spool holder 1 and the gear roller 2 have a mechanically adjustable clutch, which enables easily to regulate the tension of the stretch film through a tubular spanner 19.
Passage stretch film
The complete closure of the machine ensures the highest security level.
Pneumatic pressure group in the input and output
The pneumatic pressures assure a perfect stabilisation of the product during the wrapping. The course of the pressures is manually adjustable to simplify their positioning on the products of different heights. Their pressure in action and the descent and ascent speed are adjustable through appropriate regulators.
Lateral slides in the input and output
The lateral slides a manually adjustable to centre at best the products of different widths. There adjustment is easily to manage.